Icleaning and care – Sunbeam SMW1100 User Manual

Page 15

Advertising
background image

I

CLEANING AND CARE

1. Turn off the oven and remove the power

humidity conditions, this is normal.

plug from the wail socket before cleaning.

-7. It is occasionally necessary to remove the

2. Keep the inside of the oven clean. When

glass tray for cleaning. W&h the tray in

food splatters or spilled liquids adhere to .

warm sudsy water or in a dishwasher.

oven walls, wipe with a damp cloth. Mild

8. The roller ring and oven floor should be

detergent may be used if the oven gets

cleaned regularly to avoid. excessive

very dirty. Avoid the use of spray and

noise. Simply wipe the bottom surface of

other harsh cleaners as they may stain,

the oven with mild detergent. The roller

streak or dull the door surface.

ring may be washed in mild sudsy water

3. The outside surfaces should be cleaned

or dishwasher. When removing the roller

with a damp cloth. To prevent damage to

ring from cavity floor for cleaning, be sure

the operating parts inside the oven water

to replace in the proper position.

should not be allowed to seep into the 9. Remove odors from your oven by

ventilation openings.

combining a cup of water with’ the juice

4. Wipe the window on both sides with a

and skin of one lemon in a deep bowl,

damp cloth to remove any spills or

microwave for 5 minutes. Wipe thoroughly

spatters.

and dry with a soft cloth.

5. Do not allow the control panel to become

1.0. When it becomes necessary to replace

wet. Clean with a soft, damp cloth. When

the oven light, please consult a dealer to

cleaning the control panel, leave oven

have it replaced. Refer to the warranty

door open to prevent oven from

card.

accidentally turning on.

6. If steam accumulates inside or around the

outside of the oven door, wipe with a

soft cloth. This may occur when the

microwave oven is operated under high

02000 Sunbeam products, Inc.

IS

a registered trademark of Sunbeam Products, Inc. used under license.

Manufactured by Curtis International Ltd.

4600 Witmer industrial Estates, Unit 12, Niagara Falls, N.Y. 14305, USA.
For

Call: I-800-966-9653

14

Advertising