Samsung HT-DB350 - Manual (Page 18)

17
• Each time the button is pressed, the TV indicator (red) and
the DVD Receiver indicator (green) will flash alternately.
• You can operate the TV while the TV indicator is flashing
and the DVD player while the DVD indicator is flashing.
• Buttons Enabled for TV Operation: POWER, CHANNEL,
VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung
TVs. See page 59 for more information on the operation of
the remote control.
Press MODE button.
To Operate the TV and DVD Player
with a Single Remote Control
2 3
Press the MODE
button so that the
TV indicator on
the remote
control flashes.
TV DVD RECEIVER
TV DVD RECEIVER
Press the
POWER button to
turn on the TV.
5 6
Press the MODE
button so that the
DVD RECEIVER
indicator on the
remote control
flashes.
Press DVD
button to select
DVD/CD mode.
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
• By default, the video format is set to "NTSC".
• Each time the button is pressed, the video format
switches between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must
be the same as the video format of your TV.
Turn off the main unit and then press NTSC/PAL.
Selecting the Video Format
1
Plug the power
cord into the AC
power supply.
4
Press TV/VIDEO
button to select
VIDEO mode.
1p~30p(DB350/1650)-XSG 2004.9.18 9:32 AM Page 20