Setting the speaker mode – Samsung HT-DB350 User Manual

Page 42

Advertising
background image

2

1

4

3

Setting the Speaker Mode

Press MENU button.

Press Cursor
button to move to
‘Audio’ and then
press ENTER button.

In the Speaker
Setup, press the
ENTER button again.

Press Cursor , ,

, buttons to move

to the desired
speaker and then
press ENTER button.

For C, LS, and RS, each time the button
is pressed, the mode switches
alternately as follows: SMALL

NONE.

For L and R, the mode is set to SMALL.

With (Dolby Pro Logic II), the delay time may be different for each
mode.

With AC-3 and DTS, the delay time is set between 00 and 15mSEC.

Depending on PRO LOGIC and STEREO, the speaker mode may vary.

41

Note

SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.

31P~68P(DB350/1650)-XSG 2004.9.18 9:33 AM Page 42

Advertising
This manual is related to the following products: