Siemens GSM 900 - Manual (Page 53)

31.5.02 06-S46 Body.fm i 37 Eagle Am Engl, A31008-H4500-A1-4-7619
48
WAP
©
Setup
Preparation of the phone for Internet
access depends on the service
provider currently used:
• If the settings have already been
made by your service provider you
may begin immediately.
• If access profiles have been
assigned by your service provider
select a profile and activate it
(p. 48).
• The access profile must be set
and activated manually (p. 48).
If necessary, check with your service
provider for details.
Profiles
You can set and change up to five
access profiles (some of these may
be disabled by the service provider).
The entries and functions may vary
depending on your service provider.
You can change a profile each time
before you access the Internet
(p. 49).
Profile settings
§Menu§ Surf & fun
Internet Profiles
„
Select the profile set.
Edit The setup menu is
displayed.
„
Select the menu items
one by one and make
your entries.
You may get further information
on the entries from your service
provider.
§Edit§ Open menu.
Save The settings are stored
and the profile list is
displayed.
Profile
name:
Name the profile or rename a
default name.
WAP
parameters
IP address:
Enter the IP address.
Port:
Enter port number.
Homepage:
Enter the homepage
address (p. 48), if not set by
the service provider.
Linger time:
Enter time in seconds when
a connection should be
terminated if no input or no
data transfer takes place.
CSD / GPRS
settings
See page 83.
These are two methods the
phone uses to send/receive
information.
Special characters (as in the SMS
text editor, p. 38)
Press
*
three times for /
Press
#
three times for @
Press
0
for . (period)
Press
0
repeatedly for :
Press
*
repeatedly for ~