Spectra Watermakers Newport 400 - Manual (Page 12)

12
From the inlet thru hull to the boost pump mod-
ule use the supplied clear 3/4 (19mm) spiral
suction rated hose.
From the Clark pump brine dis-
charge connector use the supplied
5/8 (15.9mm) clear braided vinyl
hose to the brine overboard fitting.
System Piping schematic
Mount the pressure gauge in the
low pressure inlet gauge tee.
Flush water from ship’s
pressure water system
25 psi (2bar) minimum
Use the 1/2 inch nylon
tubing between the
pump module Outlet
and the Clark Pump
Use the 1/2inch braided hose
between the Flush module and
the Feed Pump Module
From the Boost Pump to the 20 micron filter
inlet us the 3/4 inch ID braided hose.