Sharp UX-470 - Manual (Page 17)

Power lead
Plug the power lead into a 230 V, 50 Hz, earthed (3-prong) AC outlet.
Caution: The mains outlet (socket outlet) should be installed near the
equipment and be easily accessable.
The machine does not
have a power on/off switch,
so the power is turned on
and off by simply plugging
or unplugging the power
lead.
Note: If your area experiences a high incidence of lightning or power
surges, we recommend that you install surge protectors for the
power and telephone lines. Surge protectors can be purchased
from your dealer or at most telephone specialty stores.
1.
I
n
s
ta
lla
ti
on
Connections
15