Sharp UX-470 - Manual (Page 29)

3
Press the START/MEMORY key.
START/MEMORY
The display will show: ENTER FAX #
4
Enter your fax number by pressing the number keys. Up to 20 digits
can be entered.
••
To insert a space between digits, press the # key. To insert a "+",
press the
* key.
••
If you make a mistake, press the SEARCH/R key to move the
cursor back to the mistake and then enter the correct number. The
new number will replace the old number.
Example: 5 5 5 2 1 4 3
Cursor: A dark square mark in the display that indicates where a number
or letter will be entered.
5
Press the START/MEMORY key to enter the fax number in
memory.
START/MEMORY
The display will show: ENTER YOUR NAME
6
Enter your name by pressing the number keys as shown in the
following chart. Up to 24 characters can be entered.
••
To enter two letters in succession that require the same key, press
the SPEAKER key after entering the first letter to advance the
cursor.
Example: SHARP = 7 7 7 7 7 4 4 4 2 2 7 7 7 7 7 7 SPEAKER
1.
I
n
s
ta
lla
ti
on
Entering Your Name and Number
27