Seagate MEDALIST PRO ST36530N/W/WC - Manual (Page 55)

Medalist Pro Installation Guide, Rev. B 53
WC drives
Applicable jumper options
Option jumpers are available as illustrated below.
Figure 17. Jumper options
Enable parity check of SCSI bus.
Disable parity check.
Parity Check option
Reserved. These locations may be marked
“TE” or “TP” but are reserved.
Write protect = Off (enables writing)
Write protect = On (disables writing)
Write Protect option
The host system has complete control over
motor start functions. Do not install a jumper
on these pins.
Delay Motor Start option
The host system has complete control over
motor start functions. Do not install a jumper
on these pins.
Enable Motor Start option
R
E
S
D
S M
E
W
P
P
D
R
E
S R
E
S R
E
S
SCSI I/O
Connector
DC Power
Connector
J2
Drive
Front
J6
J1
J2 Jumper Type
(enlarged to
show detail)
Pin 1
J2
(default)
(default)