Recording images with the flash – Sony TRV80 User Manual
Page 111
111
“Memory Stick” Operations
Recording images with the flash
The POWER switch should be set to
or
.
If you press PHOTO, the flash automatically pops up to strobe. The default setting is
auto (no indicator). To change the flash mode, press (flash) repeatedly until the flash
mode indicator appears on the screen. You cannot use this function during recording
moving pictures.
Each press of (flash) changes the indicator as follows:
t
t AUTO (No indicator)
When you set RED EYE R in
to ON in the menu settings (p. 173), the indicator
changes as follows:
t t
Forced flash:
The flash fires regardless of the surrounding
brightness.
Auto red-eye reduction:
The flash fires before recording to reduce the red-eye.
Forced red-eye reduction: The flash fires before recording to reduce red-eye
regardless of the surrounding brightness.
No flash:
The flash does not fire.
The amount of flash is automatically adjusted to the appropriate brightness. You can
also change FLASH LVL to the desired brightness in the menu settings (p. 173). Try
recording various images to find the most appropriate setting for FLASH LVL.
Recording still images on “Memory Stick”
– Memory Photo recording
(flash)