Sony TRV80 - Manual (Page 90)

90
To change the insert end point
Press ZERO SET MEMORY on the Remote Commander again after step 4 to erase the
ZERO SET MEMORY indicator and begin from step 2.
Using the Remote Commander
In step 5 to 7, press z REC and MARK simultaneously, then immediately press X. In
step 8, press X at the scene where you want to start recording from.
To insert a scene without setting the insert end point
Skip step 2 and 3. Press x on the Remote Commander or
on your camcorder when
you want to stop inserting.
3
ZERO SET
MEMORY
0:00:00
ZERO SET
MEMORY
Inserting a scene from a VCR – Insert editing