Studio RTA Fierro 402875 - Manual (Page 2)

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please
take care when assembling the unit and always place the parts on a clean, soft surface. If you require any
assistance with assembly, parts or information on other products, please visit our website: www.studiorta.com
or call us.
This furniture item (cart, entertainment center, etc.) can accommodate TV's weighing up to 95 lbs. Use of
a TV that is too large or too heavy is hazardous. Severe injury or death can occur. The TV and furniture
combination will be unstable, and may tip over.
• Check the size and weight of your TV.
• Make sure that the base of the TV can fit completely on the TV shelf.
• TV base should never extend past edge of TV shelf (picture tube cone may extend past the shelf).
• Never use a TV that is too heavy or too large.
Glass Top Maximum Weight Capacity Limit: 95 lbs/43,18 kg.
Middle Glass Shelf Maximum Weight Capacity Limit: 40 lbs/18,18 kg.
Bottom Glass Shelf Maximum Weight Capacity Limit: 50 lbs/22,73 kg.
DO NOT exceed this limit!!
Please use care and good judgement when placing objects on glass surface.
Glass: Use a commercial liquid glass cleaner and a soft cloth. DO NOT use harsh powders or any other
abrasive substances as they will scratch the glass. Avoid spraying or spilling glass cleaner on wood surfaces.
Assembly Instructions - Important:
Care and Cleaning:
Warning!
Number of Adults Recommended for Assembly: 1
Tools Needed: #2 Phillips Screwdriver
Fierro ® DLP Stand
!