Samsung ML-2251NP - Manual (Page 167)

P RINTING F ROM DOS A PPLICATIONS
D.2
About the Remote Control Panel
DOS users have access to many printer features through specific
DOS printer drivers; however, many software manufactures do
not develop printer drivers for their software programmes. Your
printer provides the software control panel for improved printer
control when DOS printer drivers are not available or when
certain print settings are not available through DOS software
programmes.
N OTE : The printer’s Remote Control Panel is not a printer driver.
It should be used to set print settings that are not available
through DOS software programmes. Printer drivers are supplied by
the manufacturers of your DOS software programmes. If your DOS
software Programme does not include a printer driver for your
printer, contact the manufacturer of the software or use one of the
alternate printer drivers.
Installing the Remote Control Panel
Remote Control Panel is installed when you select Custom and
then Remote Control Panel while installing the software. For
details, see page 2.19.
If you select Typical while installing the software, you can
install Remote Control Panel as follows:
1 From the Start menu, select Programs, Samsung ML-
2250 Series and then Maintenance.
Or Insert the supplied CD-ROM into the CD-ROM drive.
2 Select Repair.