Sony RM-VL1400T - Manual (Page 4)

4 GB
Unpacking
Check the contents of the package before using the
Remote Commander.
• Remote Commander RM-VL1400T (1)
• Operating Instructions (1)
• Preset Code List (1)
• Warranty Card (1)
• R6 (size AA) batteries (2)
Installing the batteries
Slide and open the battery compartment lid and insert
two LR6 (size AA) alkaline batteries (not supplied). Be
sure to match the + and – indications of the batteries with
the + and – indications of the battery compartment.
When to replace the batteries
Under normal conditions, the alkaline batteries will last up to 5
months. If the Remote Commander does not operate properly, the
batteries are getting weak and “E” appears on the screen.
Notes on replacing the batteries
• Do not take more than one hour to replace the batteries.
Otherwise, your unit settings (page 24) will be initialized.
• Do not attempt to recharge dry batteries.
• Do not carry dry batteries together with coins or other metallic
objects. This can generate heat if the positive and negative
terminals of the batteries accidentally come into contact with
metallic objects.
• When you are not going to use the unit for a long time, remove
the batteries to avoid damage from battery leakage and
corrosion.
• Do not use different types of batteries at the same time.
• When you replace the batteries, replace them both with new
ones.
• The supplied manganese batteries are for testing purposes. We
recommend using commercially available alkaline batteries.
(Rechargeable batteries can not be used.)
Getting Started