Siemens 1800C - Manual (Page 45)

O N - S C R E E N P R O G R A M M I N G 4 - 1
4
4
On-Screen Programming
User-Friendly Programming
We have designed your fax machine with on-screen programming using
navigation keys. User-friendly programming helps you take full advantage of all
the menu selections your fax machine has to offer.
Since your programming is done on the LCD, we created step-by-step on-screen
prompts to help you program your fax machine. All you need to do is follow the
prompts as they guide you through the menu selections and programming
options. Additionally, you can program settings more quickly by pressing
Menu/Set and the menu number using the dial pad.
Menu Selection Table
You can probably perform most of these programming operations without the
Owner’s Manual. To help you understand the menu selections, and options that
are found in the fax machine programs, use the Menu Selection Table on page
4-3.
Alternating Displays
Sometimes, the LCD alternates between the active setting, and a help message
giving brief instructions about how to proceed. The LCD message you’ll
probably see most often is shown below. When you place an original in the
ADF, it appears to tell you that you can dial a number to send a fax or you can
make a copy.
Note
You can program your fax machine by pressing Menu/Set followed by the
menu numbers. For example: to set
FAX RESOLUTION to FINE ,
press Menu/Set, 2, 2, 2 and to select FINE , and then press Menu/Set. or
FAX: NO. & START
COPY: NO. & COPY