Siemens 1800C - Manual (Page 93)

R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X E S ) 10 - 1
10
10
Remote Fax Options
(Not Available for Color Faxes)
Fax Forwarding/Paging
Programming a Fax Forwarding Number
When Fax Forwarding is set to ON , your fax machine stores the received fax in
memory. Then it dials the fax number you’ve programmed and forwards the fax
message.
1
Press Menu/Set, 2, 5, 1.
2
Press until the LCD shows
FAX FORWARD? , and then press
Menu/Set.
3
The LCD prompts you to enter the fax
number where faxes will be forwarded.
Enter the forwarding number (up to 20
digits), and then press Menu/Set.
4
Press Stop/Exit.
Programming Your Pager Number
When Paging is selected, your fax machine dials the pager number you’ve
programmed, and then dials your Personal Identification Number (PIN); this
activates your pager so you will know that you have a fax message in the
memory.
1
Press Menu/Set, 2, 5, 1.
2
Press until the LCD shows
PAGING? , and then press Menu/Set.
3
Enter your pager phone number (up to 20
digits) followed by # #, and then press
Menu/Set. Do not include the area code
if it is the same as that of your fax machine.
For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
You cannot use Paging and Fax Forwarding at the same time.
You cannot use Paging and Fax Forwarding when Fax Storage is set to
OFF .
1.FAX FWD/PAGING
or
FWD#:
1.FAX FWD/PAGING
or
PAG#: