Samsung SRS580DTKG - Manual (Page 25)

IF THERE IS CLEARANCE BETWEEN FRIDGE DOOR
AND FREEZER DOOR, PLEASE FOLLOW THE STEPS.
● First : Please level up the refrigerator.
(The differance can cause, if the floor where installed is uneven)
● Freezer door is lower than that of
refrigerator
1) Insert a straight driver (-) (➀) into hole
of the control lever (➁), rotates it clock-
wisely and level up the balance.
●
Freezer door is higher than that
of refrigerator
1) Insert a straight driver (-) (➀) into hole
of the control lever (➁), rotates it
clockwisely and level up the balance.
❇ Not to adjust the clearance by using control lever, Please refer to the next page.
DIFFERANCE OF HEIGHT
DIFFERANCE OF HEIGHT
➀ DRIVER(-)
➀ DRIVER(-)
➁
CONTROL LEVER
➁
CONTROL LEVER
9
DA68-00500P 6/26/02 2:34 PM Page 25