Sanyo DC-DA370 - Manual (Page 18)

- 19 - - 18 -
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing.
Components identified with the IEC symbol
!!! in the parts list and the
schematic diagram designated components in which safety can be of
special significance. When replacing a component identified by
!!! , use
only the replacement parts designated, or parts with the same ratings of
resistance, wattage or voltage that are designated in the parts list in this
manual. Leakage-current or resistance measurements must be made to
determine that exposed parts are acceptably insulated from the supply
circuit before returning the product to the customer.
SCHEMATIC DIAGRAM (FRONT)
This is a basic schematic diagram.