Specifications, System connections – Sanyo DC-DA370 User Manual

Page 2

Advertising
background image

- 1 -

SPECIFICATIONS

General
Output power ......................... 12.5 W x 2
(at 4 ohms, 10% distortion)
Inputs ..................................... VIDEO IN : 400 mV / 50k ohms
Outputs .................................. SPEAKERS : 4 ohms

PHONES : 8 - 32 ohms
OPTICAL OUT:Optical

Power requirements ............... AC 230V, 50Hz
Power consumption ............... 40 W
Dimensions (W x H x D) ........ Approx. 160 x 251 x 207 mm
Weight .................................... Approx. 3.2 kg

Speaker system
Type ....................................... 3 way bass reflex
Unit used : Woofer ................. 10 cm cone type
: Mid range ............. 5 cm cone type
: Tweeter ................ 2 cm piezoelectric
Maximum
power-handling capacity ..... 25 Watts (peak)
Nominal impedance ............... 4 ohms
Dimensions (W x H x D) ........ Approx. 150 x 245 x 224 mm
Weight .................................... Approx. 1.9 kg (per speaker)

Specifications subject to change without notice.

Tuner
Reception frequency .............. FM : 87.5 - 108.0 MHz

MW: 522 - 1611kHz
LW : 144 - 288kHz

CD player

Channels ................................ 2-channel stereo
Sampling frequency ............... 44.1 kHz
Pick-up ................................... Optical 3-beam

semiconductor laser

Wow and Flutter ..................... Below measurable limits
Wave length ........................... 790 nm
Laser output ........................... 0.6mW(Continuous wave max.)

Cassette deck section
Track system ......................... 4-track, 2-channel stereo
Frequency response .............. 60 Hz - 13.5 kHz
Signal to noise ratio ............... 50 dB
Wow and Flutter ..................... 0.12% (WRMS)
Fast forward / Rewind time .... Approx. 110 sec. (C-60)

SYSTEM CONNECTIONS

Video/Auxiliary equipment

External aerial

AM loop aerial

Aerial wire

Digital equipment

R ch speaker

L ch speaker

Amplified Subwoofer

To an AC outlet

Advertising