Shark SUPER STEAMER SC710 S - Manual (Page 4)

Unit Parts
1. Main Unit
2. Handle
3. Trigger Button
4. Filler Hole
5. Safety Cap
6. Indicator Light
7. Power Cord
Accessories
8. Measuring Cup
9. Funnel
10. Steam diffuser
11. Cleaning Cloth
12. Concentrator Nozzle
13. Window Squeegee
14. Small Detail Brush
15. Angle Adapter
16. Hose
Technical Specifications
Voltage: 120V., 60Hz.
Power: 1000 Watts
Water Capacity: 9 Oz.
3
GETTING TO KNOW YOUR SHARK SUPER STEAMER
Upholstery
Use the steam diffuser with the cleaning cloth. Use fast, light strokes, avoid getting
the fabric wet. Be patient with stubborn spots; work on a spot gently for no more than
a minute at a time, then wait five minutes for the area to dry and repeat. Use circular
movements or back-and-forth and side-to-side movements to get all sides of surface
fibers. Finish with a brushing in one direction that will give the fabric a uniform
appearance.
CAUTION: Always determine the color-fastness of any fabric - especially
with reds or blues - by taking a clean, moist, warm towel and gently rubbing a
small area as far down on the back or other out of the way place on the
furniture as possible. If color comes off on the towel, you may need to have
the piece dry cleaned.
Window, Glass Surfaces and Mirrors
To use the window squeegee, work with the vapor jet down using the top to bottom
movements. To do this without leaving streaks, use lateral movements from the top
to the bottom of the surface.
Soap Scum
Soap scum dissolves almost immediately under a combination of heat and moisture.
Rinse the surface with a small amount of water afterwards or go back over it once
more with a clean terry cloth towel.
Notes: Soap scum sometimes will develop a hard surface from waterborne
minerals. If this is the case, use the small detail brush first to break up this surface -
or spray or wipe first with lemon, vinegar or seltzer soda water to soften the
minerals.
Moving too slowly can dry out the soap scum and cause it to granulate on the
surface. The surface will have a gritty feel. If this happens, apply vapor to the
surface with the small detail brush again and re-clean.
Bathroom Areas
To clean the bathtub or shower area, use the small detail brush for grout, shower
door tracks, hard to get areas and heavily soiled areas. Allow plenty of time for the
heat to penetrate the surface. This is especially helpful in the shower area if there is
tile or grout.
To clean the toilet, use small detail brush. Use a terry cloth towel or paper towel to
wipe up excess moisture and residue.
To clean the sink and faucets, use small detail brush.
8
USAGE SUGGESTIONS FOR YOUR SUPER STEAMER
CAUTION: When cleaning outside windows, always avoid any sudden
changes in temperature to prevent breakage or cracks.