Sony VGN-TX700 User Manual
Page 142
142
Troubleshooting
Why won't my computer enter Standby or Hibernate mode?
The computer may become unstable if the operating mode is changed before the computer completely enters Standby or
Hibernate.
To restore the computer to normal operating stability
1
Close all open programs.
2
Click Start, Turn Off Computer, and then Restart.
3
If the computer does not restart, press the Ctrl+Alt+Delete keys simultaneously.
In the Windows Task Manager window, press the appropriate button and restart the computer.
4
If this procedure does not work, press and hold the power button or slide and hold the power switch until the computer
turns off.
What should I do if the battery indicator is flashing and my computer won't start?
❑
This symptom could be due to the battery pack not being installed properly. To resolve this symptom, switch off the
computer and remove the battery pack. Then install the battery pack to the computer again. For details, see Installing
the Battery Pack
.
❑
If the symptom persists after performing the above, it means the installed battery pack is not compatible. Remove the
battery pack and contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony online
support Web site.