Using the optical disc drive – Sony VGN-TX700 User Manual

Page 41

Advertising
background image

41

n

N

Using Your VAIO Computer

Using the Optical Disc Drive

Your computer is equipped with an optical disc drive.

To insert a disc

!

The location of the drive eject button depends on the model you purchased. See Locating Controls and Ports

(page 11)

.

1

Turn on the computer.

2

Press the drive eject button (1) to open the drive.
The tray slides out.

On VGN-TX700 Series models, if power supply to the optical disc drive is disabled by VAIO Power Management, it will take a while to eject the drive
tray. Note that the substitute drive eject button is disabled when the optical disc drive is not powered.
When recovering your system, turn on the computer and press the substitute drive eject button on the optical disc drive. Insert your Recovery Disc
into the optical disc drive, turn off the computer, and then turn on the computer again to launch the VAIO Recovery Wizard.

Advertising