Sanyo CLT-D6614 - Manual (Page 29)

9
Clock.and.alarm.setting
If you subscribe to Caller ID service from your local telephone company, the time
will be updated automatically when received a call.
If you do not subscribe to Caller ID service, you will need to set the time
manually.
To.set.the.time:
1. Touch
and select the SET TIME menu and then the CLOCK SETTING
submenu.
2. Use
0.-.9 to enter the time. If you make a wrong enter, use or to
move the cursor to the incorrect digit and re-enter.( Use. .to.toggle.AM./..
. PM.if.12.hour.display.format.is.selected).
3. Touch
.to confirm.
. . . . . . . . . .
To.change.time.display.format
1. Touch
and select the SET TIME menu and then the DISPLAY FORMAT
submenu.
2. Use
or ..to select 12 / 24 hour format.
3. Touch . to confirm.
4. Use or ..to select day-month format 'MM/DD' or ' DD/MM'.
5. Touch .to confirm.
. . . . . . . . . .
To.set.the.alarm
1. Touch
and select the SET TIME menu and then the ALARM submenu.
2. Use or . to select ‘ON’.
3. Touch .to confirm.
4. Use 0.-.9 to enter alarm time.
5. Touch .to confirm.
To switch the alarm to off, repeat steps 1-3, selecting 'OFF' instead of ' ON'.
NOTE: indicates alarm is set.
• When the reminder occurs, your phone will ring. To.stop.alarm.tone,.simply..
. touch.the.keypad. If the keypad is not touched, alarm will ring for  minute
and then automatically turn off.
• If the alarm is activated during a call, you will hear two alarm tone and alarm
icon flashes.
HANDSET.SPECIAL.FEATURES