Sanyo MM-9000 - Manual (Page 174)

164 Section 2I: Using Your Phone’s Voice Services
Using Digit Training
This feature allows you to train the phone to recognize your
voice when speaking a phone number. You can get better
recognition accuracy by programming your intonation
pattern into your phone.
To program DigitTraining:
1. Press to activate the Command menu.
2. Say “Tools.”
3. Say “DigitTraining.”
4. Say “Start”or press Start (left softkey) to start
programming.
5. Follow the voice prompts and recite the digits into your
phone’s microphone. (A voice prompt will indicate the
current rate of adaptation.)
6. Respond to the voice prompt repeatedly until
adaptation is complete. (When you are finished training,
you will hear a confirmation that the adaptation has
been successfully completed.)
Note: Try digit training in a quiet environment for the best results. When
you train, make sure you speak clearly and distinctly in your natural voice.
To activate DigitTraining:
1. Press to activate the Command menu.
2. Say “Tools.”
3. Say “DigitTraining.”
4. Say “On”or press On (right softkey) to activate the
existing data. (A voice prompt will announce the
activation of digit training.)