Sanyo MM-9000 - Manual (Page 50)

40 Section 2A: Your Sprint PCS Phone – The Basics
Using Speed Dialing
With this feature, you can dial your favorite entries using one
key press for locations 2-9. (See “Assigning Speed Dial
Numbers”on page 130.)
To use speed dial for voice calls:
ᮣ From standby mode, press and hold the appropriate key
for approximately two seconds.
– or –
From standby mode, press the appropriate key and press
or .
The display confirms that the number has been dialed when it
shows “Connecting...”.
To use speed dial for Sprint PCS Ready Link calls:
ᮣ From standby mode, press the appropriate key and
press
. (See “Assigning Speed Dialing for Sprint PCS
Ready Link Entries”on page 250.)
The display confirms that the number has been dialed when it
shows “R-Link calling...”.
Note: Speed dialing is not available when you are roaming; when you are
roaming off the nationwide Sprint PCS network, you must always dial using
eleven digits (1 + area code + number).