Symantec VERITAS STORAGE FOUNDATION HP-UX - Manual (Page 45)

47 Upgrading the product
Upgrading from 4.1 to 5.0
12 Change the configuration files by running the following commands on one
of the upgraded nodes. For example, system01.
# /opt/VRTS/bin/hastart
# /opt/VRTS/bin/haconf -makerw
# hagrp -unfreeze cvm -persistent
# hagrp -unfreeze service_group -persistent
# /opt/VRTS/bin/hares -delete qlogckd
# /opt/VRTS/bin/haconf -dump -makero
# /opt/VRTS/bin/hastop -all -force
where
service_group
is the command that displays the service groups by
hagrp -dep cvm .
13 If you have configured the VCS Cluster Manager (Web Console), complete
step a through step d to modify the
/etc/VRTSvcs/conf/config/main.cf file.
a Remove VRTSweb:
Process VRTSweb (
PathName = "/opt/VRTSvcs/bin/haweb"
Arguments = "10.129.96.64 8181"
)
b Replace it with:
VRTSWebApp VCSweb (
Critical =0
AppName = vcs
InstallDir = "/opt/VRTSweb/VERITAS"
TimeForOnline = 5
)
c Add the NIC resource in the ClusterService group. For example, where
the name of the NIC resource is named csgnic and the public NIC device
is hme0, add:
NIC csgnic (
Device = hme0
d Add new dependencies for the new resources in the ClusterService
group. For example, using the names of the VRTSWebApp,
NotifierMngr, IP, and NIC resources, enter lines that resemble:
VCSweb requires webip
ntfr requires csgnic
webip requires csgnic
14 Verify the syntax of the /etc/VRTSvcs/conf/config/main.cf file by running
the following commands on system01:
# cd /etc/VRTSvcs/conf/config
# /opt/VRTS/bin/hacf -verify .
15 Start VCS on all the upgraded nodes. Run the following command on
system01 and system02.
# /opt/VRTS/bin/hastart