SanDisk FUZE-UM809-ENG - Manual (Page 13)

Sansa ® Fuze TM Overview 10
Battery Level Indicator
The battery level indicator is located at the bottom-right corner of the screen.
Battery Full Battery Low
Charging
1. Connect the larger end of the Sansa cable into the Sansa media player.
2. Connect the smaller end of the Sansa cable into an available USB port on the
computer.
3. The computer must be on for all the USB ports to charge the battery. Your Sansa
will show connected and the yellow charging indicator will appear. The battery
level indicator will blink while charging. You will not be able to play music, watch
videos, or view photos while the player is connected to the computer.
4. To stop recharging, simply disconnect the USB cable.
The battery can also be charged using an AC adapter (not included) or a car adapter
(not included); you will be able to play your device while charging with one of the
adapters.
If your player is not recognized by your computer, make sure you have Windows Media™
Player version 10 or higher installed. You can also change the USB Mode to MSC if you do
not have Windows Media Player. For Mac, ensure that USB Mode is set to Auto Detect or
MSC mode. See
Section 9 – Settings for more details.