Sharp FO-4650 - Manual (Page 19)

Connections
17
1. Ins
tall
a
tion
Connecting the telephone line cord
Insert one end of the line cord into the jack on the back of the machine
marked TEL. LINE. Insert the other end into a standard (RJ11C)
single-line wall telephone jack.
Note: The fax machine is set for touch-tone dialing. If you are on a pulse
dial (rotary) line, you must set the fax machine for pulse dialing by
changing Option Setting 22. This procedure is described in Chapter 6,
Optional Settings.
Connecting a telephone (optional)
If desired, you can connect a telephone to the TEL. SET jack on the
back of the machine.
all-FO4700.book Page 17 Tuesday, November 28, 2000 2:07 PM