SMC Networks BLW-54MF - Manual (Page 60)

55
3
Chapter 3 Advanced Setup & Configuration
œIncoming ProtocolĈScroll down the list to choose the incoming
application type: TCP or UDP type.
œIncoming PortĈEnter a port or a range of port to be the incoming port.
Once the trigger port is detected, the incoming packets are allowed to
pass the firewall to the specified incoming ports.
œAddĈEnter the special application and then click this button to add it to
the rule.
œUpdateĈUpdate the modification you have made to this function.
œDeleteĈDelete the application you set before.
œCancelĈIf you do not want to do this setting right now, you may click
this button to exist.
2.4 DMZ
If your computer cannot use Internet applications or cannot provide
services to remote users when applying BLW-54MF at the same time, you
can let the host which wants to access to the Internet using DMZ function.
Enter the host Ņs LAN IP address to enable this function, but be aware that
one BLW-54MF can only correspond to a single DMZ host.
œDMZ Host IPĈClickņEnableŇcheck box to start entering the DMZ
host's IP address and then the ņDMZ Host IPŇwill begin to receive all
unknown connections and data. Besides, you must enter the IP address
of the PC which is being the ņDMZ Host IP.Ň