SMC Networks BLW-54MF - Manual (Page 68)

63
3
Chapter 3 Advanced Setup & Configuration
9.After choosing the country domain, please enter the configuration page
of BLW-54MF. Go to ņManagementƖSettingsŇpage and then choose
ņEnableŇEZ-GO function, and the Status EZ-GO LED on the front
panel of BLW-54MF will be blinking. The other way to enable EZ-GO
function is to press EZ-GO button on the back panel of BLW-54MF, and
you can also see Status EZ-GO LED blinking as well. The blinking
LED means that you can use JumpStart to start searching BLW-54MF
and make a connection. The searching time period is 5 minutes long. If
GW-US54SG cannot connect with BLW-54MF in 5 minutes, this LED
will be off and the EZ-GO function will be disabled automatically. If
you want to restart EZ-GO function, please press EZ-GO button at the
back of BLW-54MF again or choose ņReset EZ-GOŇfunction on the
configuration page of BLW-54MF again.