Sony HT-SF1000 - Manual (Page 37)

37 GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2661769142SF1000_GB\2661769142\GB05AMP_HT-SF1000-
CEL.fm masterpage: Right
model name1[HT-SF1000]
model name2[HT-SS1000]
2-661-769-14 (2)
Am
plifie
r O
p
erati
ons
x A.V. SYNC. (A/V Sync)
• A.V.SYNC. Y (Yes) (Delay time: 68 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display is minimized.
• A.V.SYNC. N (No) (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• This parameter is valid only when you use a sound
field selected with the 2CH or A.F.D. buttons.
• This parameter is not valid when PCM 96 kHz or
DTS 2048 signals are input.
x V2 INPUT (Audio input mode for
VIDEO 2 input)
Lets you select the audio input mode for
VIDEO 2 input.
• V2 AUTO
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• V2 OPT
Specifies the digital audio signals input to
the DIGITAL VIDEO 2 OPT IN jack.
• V2 ANLG
Specifies the analog audio signals input to
the VIDEO 2 AUDIO IN (L/R) jacks.
x CD INPUT (Audio input mode for
SA-CD/CD input)
Lets you select the audio input mode for
SA-CD/CD input.
• CD AUTO
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• CD OPT
Specifies the digital audio signals input to
the DIGITAL SA-CD/CD OPT IN jack.
• CD ANLG
Specifies the analog audio signals input to
the SA-CD/CD AUDIO IN (L/R) jacks.
Settings for the system
(SYSTEM menu)
You can use the SYSTEM menu to set the
distance of the speakers connected to this
system.
Select “6-SYSTEM” in the amplifier menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 31) and
“Overview of the menus” (page 32)
SYSTEM menu parameters
x FRT DIST. (Front speakers
distance)
Lets you set the distance from your listening
position to the front speakers (A). If both
front speakers are not placed an equal distance
from your listening position, set the distance as
the average distance between the front
speakers.
x CNT DIST. (Center speaker
distance)
Lets you set the distance from your listening
position to the center speaker. Center speaker
distance should be set from a distance equal to
the front speaker distance (A) to a distance
1.5 meters closer to your listening position
(B).
30˚ 30˚
100˚-120˚ 100˚-120˚
A
C D
A
B
continued
GB01COV_HT-SF1000-CEL.book Page 37 Thursday, August 24, 2006 8:27 AM