Sony HT-SF1000 - Manual (Page 50)

50 GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2661769142SF1000_GB\2661769142\GB06OTH_HT-SF1000-
CEL.fm masterpage: Left
model name1[HT-SF1000]
model name2[HT-SS1000]
2-661-769-14 (2)
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
When Sleep Timer is being used, “SLEEP”
lights up on the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
Changing button
assignments
You can change the factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the DVD jacks on the receiver, you
can set the DVD button on this remote to
control the DVD recorder.
1
Hold down the input button of
which you want to change the
assignment.
Example: Hold down DVD.
2
Referring to the table below,
press the corresponding button
for the category you want.
Example: Press 4.
Now you can use the DVD button to
control the DVD recorder.
Other Operations Using the Remote
GB01COV_HT-SF1000-CEL.book Page 50 Thursday, August 24, 2006 8:27 AM