Sony CDX-M600 - Manual (Page 20)

20
Adjusting the equalizer curve
1
Press (MENU).
2
Press M or m repeatedly until “EQ Tune”
appears.
3
Press (ENTER).
4
Press < or , to select the desired
equalizer curve.
Rock y Vocal y Groove y Techno y
Custom y off
5
Press (ENTER).
6
Press < or , to select the desired
frequency.
62 Hz y 157 Hz y 396 Hz y 1.0 kHz y
2.5 kHz y 6.3 kHz y 16.0 kHz
7
Press M or m to select the desired level.
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
To restore the factory-set equalizer curve,
press (ENTER) for two seconds.
8
Press (MENU) twice.
When the effect setting is complete, the
normal playback mode appears.
Centre of sound
field
Normal setting
(1 + 2 + 3)
Front part
(1 + 2)
Right front (2)
Left front (1)
Rear part (3)
Cancel
2 1
3
Display
window
POS
All
POS
Front
POS
Front-R
POS
Front-L
POS
Rear
POS
off
Selecting the listening
position
You can set a delayed time for the sound to
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
center of the sound field no matter where you
sit in the car.
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (SOUND) momentarily until “POS”
appears.
3
Press < or , to select the desired
listening position.
All y Front y Front-R y Front-L y Rear y
off
The listening positions appear in the order
shown above.
To cancel the POS mode, select “off.”
After three seconds, the display returns to
the normal playback mode.