Sony CDX-M600 - Manual (Page 30)

30
Storing the TV channel
names
Follow the steps in “Storing the station
names” (page 18).
Displaying the TV or radio station
names
Press (LIST) during TV or radio
reception.
Example: When receiving the FM1 band
1 Preset numbers
2 Stored station names
3 Frequencies*
* If the name of a station is not stored, the
frequency of that station will be displayed
instead.
Notes
• It may take some time before all indications
appear in the display.
• The TV channel does not appear during list
display.
• The contents of the preset memory cannot be
listed when the unit is in simultaneous play
mode (page 31).
Turning off the display
During radio reception, press (LIST)
again.
During TV reception, the list display on the
TV monitor will automatically turn off after
a few seconds.
FM
1
2
3
4
5
6 W
W
W C
B
K
1
1
B
T
0
0
S
U
2
S WR K I S
1
S
L
1 . 9
. 7
Memorizing only the
desired TV channels
You can store up to 12 channels (six each for
TV1 and TV2) on the number buttons in the
order of your choice.
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Press < or , to tune in the TV channel
you want to store on each number
button.
3
Press and hold the desired number
button ((1) to (6)) of the unit until you
hear a beep sound.
The number button indication and “Mem”
appear in the display.
Note
If you try to store another channel on the same
number button, the previously stored channel will
be erased.