Sunbeam MX7700 - Manual (Page 6)

Before using your Mixmaster Series II
Before assembling your Sunbeam Mixmaster
Series II, be sure the power cord is
unplugged from the power outlet and the
speed control dial is in the 'O' position.
1. Press the ‘tilt' button, located on the
neck of the Mixmaster and swing the
mixer head up, see Figure 1. The mixer
head will lock into this tilt position.
2. Select the desired attachments depending
on the mixing task to be performed;
– Beaters for creaming butter and sugar,
mixing cake mixes and whisking cream
and egg whites.
– Dough hooks for kneading dough and
other heavy mixtures.
Inserting attachements
3a.Take the two beaters, place the
oval shaped beater (A) into the
left socket, (outer position).
Place the other beater, with
the plastic nodules on the base
(B) into the right socket, (inner
position), see Figure 2.
3b. Take the two dough hooks, place the
dough hook with the shorter hook at
the bottom
(A) into the left socket,
(outer position). Likewise, place the
dough hook with the longer hook at
the bottom
(B) into the right socket,
(inner position), see Figure 3.
Important: Please review Figure 4. The
illustration on the left is how the dough
hooks should look when correctly inserted.
However should the dough hooks once
4
Using your Sunbeam Mixmaster
Series II
A
B
Figure 2
Press 'tilt' button
and tilt the mixer
head backward.
Figure 1
A B
A
B
Figure 3
A B