SonicWALL TZ 150 Wireless - Manual (Page 13)

Page 12
PPPoE
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPPoE Client
Click Next.
PPTP
The Setup Wizard screen should display:
WAN Network Mode: NAT with PPTP Client
Obtain an
IP Address
Automatically Select this if your ISP assigns you a dynamic
IP address.
Use the
following
IP Address Select this if your ISP has assigned you a
static IP address, and enter the address.
PPPoE User
Name Enter the user name for your Internet account.
Your ISP may require you to enter your
username in e-mail address format, including
“@” and the domain name, for example,
[email protected]
PPPoE
Password Enter the password for your Internet account.
Inactivity
Disconnect
(minutes) Check this box if you want the
SonicWALL TZ 150 Wireless to disconnect
from the Internet if there is no traffic for the
number of minutes you enter.
PPTP Server
IP Address Enter the address of the server you are
connecting to.
PPTP
User Name Enter your network user name.
PPTP
Password Enter your network password.