Samsung AS18J - Manual (Page 10)

E - 10
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1 If necessary, press the button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
IM PORTANT The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:

Plugged in
 Stopped
lt will start up normally after three minutes.
2 If the is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result:  The indoor unit beeps each time you press the button.
 The air conditioner runs in the Dry mode.
Note You can change modes at any time.
3 To adjust the temperature, press the button one or more times until
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
 Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps

The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.

The fan is running in auto mode.
4 To control the direction of the air flow, refer to pages 13.
DB98-26505A(1)-E.indd 10 2006-10-27 15:45:59