Samsung AS18J - Manual (Page 8)

E - 8
Selecting the Automatic Operating Mode
You can start the air conditioner in Auto mode from your remote
control.
1 If necessary, press the button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
IM PORTANT The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:

Plugged in
 Stopped
lt will start up normally after three minutes.
2
If the is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result:  The indoor unit beeps each time you press the button.
 The air conditioner runs in the Auto mode.
 The Auto mode cools the room in optimum
condition by adjusting the indoor temperature
depending on the set temperature.
Note You can change modes at any time.
3 To adjust the temperature, press the button one or more times until
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
 Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
DB98-26505A(1)-E.indd 8 2006-10-27 15:45:52