Samsung SMART DOME SCC-C6407 - Manual (Page 18)

3-10
E
EXIT
The EXIT menu is used to quit the CAMERA SET menu of the
SCC-C6407 and return to the MAIN MENU.
- QUIT
: Ignores the changed information and restores the saved
information.
- SAVE : Saves the information of the setting condition of the menu.
- PRESET : Ignores the changed information and restores the initial
factory defaults of the menu.
(CAMERA SET)
CAMERA ID OFF
V-SYNC INT
COLOR/BW BW...
MOTION DET OFF
ZOOM SPEED 3
DIGITAL ZOOM OFF
DISPLAY ZOOM OFF
DISPLAY P/T
OFF
EXIT QUIT
(CAMERA SET)
CAMERA ID OFF
V-SYNC INT
COLOR/BW BW...
MOTION DET OFF
ZOOM SPEED 3
DIGITAL ZOOM X10
DISPLAY ZOOM OFF
DISPLAY P/T
OFF
EXIT QUIT
DIGITAL ZOOM
You may set up the digital zoom magnification ratio in the DIGITAL ZOOM
menu. The magnification ratio ranges from OFF to 10. If you set Digital
Zoom of SCC-C6407 to max. 10 times, the mode will become the 32 time
optical zoom and you will be able to enlarge a subject by max. 320 times.
Use Left or Right to select a magnification ratio in the DIGITAL ZOOM menu.
DISPLAY ZOOM
In DISPLAY ZOOM, you can display the ZOOM scale on the screen.
❈ If no change on the ZOOM scale is made for 3 seconds, the
information window will disappear.
3-9
ALC
Choose the ALC of the IRIS item and press [ENTER] and set he submenu
to the Video Output level and BLC will be shown.The Video Output Level
can be set in the level item using the [Left, Right] keys.
2. VIDEO SET MENU
IRIS
There is a function to automatically adjust IRIS to the incoming light level.
Owing to this function, you may set up the brightness level yourself.
The ALC(Auto Light Control) menu allows you for video output level setup.
➜
Press
[Enter]
(ALC)
BLC OFF
LEVEL (0)---- I----
RET
(VIDEO SET)
IRIS ALC...
SHUTTER AUTO X2...
MOTION NORM
WHITE BAL ATW1
DIS ---
FOCUS MODE ONEAF
SPECIAL
...
EXIT QUIT
➜
Press
[Enter]
BLC (Submenu of the ALC menu)
If you use a general camera to photograph a subject under backlight or
bright illumination, the subject will be shown dark on the monitor due to
the backlight. BLC(Back Light Compensation) is used to prevent such a
backlight problem to secure distinct images under bright illumination.
Using the [Left, Right] keys, you can set up BOTTOM…, TOP…, LEFT…,
RIGHT…, CENTER… 5 preset areas and the USER…function that can
directly set the areas. For example, for the items in the BLC menu, you
can confirm the preset BOTTOM area by pressing [ENTER] key in the
BOTTOM… status.
(ALC)
BLC BOTTOM...
LEVEL (0)----I----
RET
(CAMERA SET)
CAMERA ID OFF
V-SYNC INT
COLOR/BW COLOR...
MOTION DET OFF
ZOOM SPEED 4
DIGITAL ZOOM OFF
DISPLAY ZOOM ON
DISPLAY P/T
OFF
EXIT SAVE
X020
DISPLAY P/T
In DISPLAY P/T, you can display the location of Pan/Tilt on the screen.
❈ If no change on the Pan/Tilt location is made for 3 seconds, the
information window will disappear.
❈ It allows an error range of ±2°.
(CAMERA SET)
CAMERA ID OFF
V-SYNC INT
COLOR/BW COLOR...
MOTION DET OFF
ZOOM SPEED 4
DIGITAL ZOOM OFF
DISPLAY ZOOM OFF
DISPLAY P/T
ON
EXIT SAVE
347/060
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3-9