Samsung CLX-3160 - Manual (Page 32)

5.8
<Loading originals and print media>
For paper smaller than Letter-sized, return the paper guides to their
original positions and adjust the paper length guide and paper width
guide.
5 Close the paper cover.
6 Slide the tray 1 back into the machine.
Notes
• Do not push the paper width guides far enough to cause the
material to warp.
• If you do not correctly adjust the paper width guides, it may
cause a paper jams.
In the manual feeder
The manual feeder can hold special sizes and types of print material,
such as transparencies, postcards, note cards, labels, and envelopes. It
is useful for single page printing on letterhead or colored paper.
To load paper in the manual feeder:
1 Load the paper with the side to be printed on facing up.
Depending on the media type you are using, keep the following
loading guidelines:
• Envelopes: Flap side down and with the stamp area on the top left
side.
• Transparencies: Print side up and the top with the adhesive strip
entering the machine first.
• Labels: Print side up and top short edge entering the machine
first.
• Preprinted paper: Design side up with the top edge toward the
machine.
• Card stock: Print side up and the short edge entering the machine
first.
• Previously printed paper: Previously printed side down with an
uncurled edge toward the machine.
Caution
• When you do the printing job from the manual feeder, clear
the paper in the tray 1 away.