Sony DVP-NS3100ES - Manual (Page 28)

28
• D-PCM (page 74)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 74)
13
Press X/x to select the type of DTS
signal sent to your amplifier
(receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
25 (
through ).
• D-PCM (page 74)
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 74)
14
Press ENTER.
◆ When “DIGITAL OUTPUT” is selected
in step 11
• Quick Setup is finished and
connections are complete.
◆ When “DIGITAL & 5.1CH OUTPUT” is
selected in step 11
• The Setup Display for “SPEAKER
SETUP” appears.
15
Press X/x to select the size of the
center speaker.
If no center speaker is connected, select
“NONE” (page 75).
16
Press ENTER.
“REAR” is selected.
17
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
“NONE.”
18
Press ENTER.
“SUBWOOFER” is selected.
19
Press X/x to select whether or not
you have connected a subwoofer.
20
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
AUDIO SETUP (DIGITAL OUT)
DIGITAL OUT:
DOLBY DIGITAL: ON
DTS:
48kHz/96kHz PCM:
D-PCM
D-PCM
DOLBY DIGITAL
B-2 C-2
D-2 D-3
B D
B-2 C-2
D-2 D-3
SPEAKER SETUP (DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF TEST TONE:
FRONT:
CENTER:
NONE
SMALL
LARGE
LARGE
REAR:
SUBWOOFER:
To set press then ENTER
LARGE
SPEAKER SETUP (DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF TEST TONE:
FRONT:
CENTER: LARGE
REAR:
SUBWOOFER: LARGE
LARGE
SMALL
LARGE
NONE
SPEAKER SETUP (DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then . ENTER ENTER
DISPLAY
YES
YES
NONE
LARGE