Sony DVP-NS3100ES - Manual (Page 67)

67
Us
in
g Vari
ous
Addi
tion
al
Fu
nc
tions
Controlling the volume of your
AV amplifier (receiver) with the
remote
1
Slide the TV/DVD switch to DVD.
2
Hold down [/1, and enter the
manufacturer’s code for your AV
amplifier (receiver) using the number
buttons (see “Code numbers of
controllable AV amplifiers (receiver)”
below).
3
Release [/1.
The VOL +/ – buttons control the AV
amplifier’s volume.
◆ If you want to control the TV volume
Slide the TV/DVD switch to TV.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
* If you cannot control the volume of your Sony AV
amplifier (receiver) with the remote, try entering
the code number 91, and change the command
mode of your amplifier (receiver) to
“COMMAND MODE [AV1]” (not all amplifiers
have this option).
Refer to the instructions supplied with your
amplifier (receiver) to change the command
mode.
z Hint
If you want to control the TV’s volume even when
the TV/DVD switch is set to DVD, repeat steps 1
and 2, and then enter the code number 90 (default).
Philips 08,21
Pioneer 06,16
Portland 03
Proscan 10
Quasar 06,18
Radio Shack 05,10,14
RCA 04,10
Sampo 12
Samsung 03,04,12,20
Sanyo 11,14
Scott 12
Sears 07,10,11
Sharp 03,05,18
Sylvania 08,12
Teknika 03,08,14
Toshiba 07,18
Wards 03,04,12
Yorx 12
Zenith 14,15
Manufacturer Code number
Manufacturer Code number
Sony* 78, 79, 80, 91
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96