Sony SCPH-10420 G - Manual (Page 19)

19
GB
z Repeated playback of a selected scene
(A-B Repeat)
You can set a specific section of the disc to be repeatedly played back.
1 During playback, press the A-B button at the point you want
to start repeated playback.
The starting point (point A) is set.
2
Press the A-B button at the point you want to end repeated
playback.
The ending point (point B) is set, and repeated playback of the section
from A to B begins.
To check playback settings
During playback, press the TIME button. Icons for the currently set
playback modes are displayed in the top right corner of the screen.
To end A-B Repeat Play
Press the CLEAR button.
Notes
• A-B Repeat may not be available on some discs or some sections of a disc.
• The A-B Repeat function can be set for only one section at a time.
• A-B Repeat cannot be set to select a section of video that includes content from
more than one title.
• A-B Repeat is cleared when:
– Program Play, Shuffle Play, or Repeat Play has been set.
– Playback has been stopped.
– The DVD disc menu is displayed.
– The disc tray is opened using the Z open/close button of the DVD remote
control or the A (open) button on the console front.
– The console is reset or goes into standby mode after the I /1 (on/standby)/reset
button of the DVD remote control or the 1 (standby)/reset button on the
console front has been pressed.
– The power is turned off using the main power switch on the console rear.
• When A-B Repeat is set, Program Play, Shuffle Play, and Repeat Play are cleared.