SOYO SY-5SSM/5 - Manual (Page 15)

SY-5SSM & SY-5SSM/5 Quick Start Guide
13
Quick BIOS
Setup
3 3 Quick BIOS Setup
After the hardware installation is complete, turn the power switch on, then press the
<DEL> key during the system diagnostic checks to enter the Award BIOS Setup program.
The CMOS SETUP UTILITY will display on screen. Then, follow these steps to complete
the quick BIOS setup.
Step 1.
Select [LOAD SETUP DEFAULT]
Select the “LOAD SETUP DEFAULT” menu and type “Y” at the prompt to load the BIOS
optimal setup.
Step 2.
Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
Step 3.
Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and continue the
boot sequence.