Source Technologies STI MICR ST9335 - Manual (Page 61)

Secure MICR Printer User’s Guide

Source Technologies
July 2003 All rights reserved
CARTRIDGE STATUS = UNKNOWN
= OK
= LOW
= EMPTY
CARTRIDGE SERIAL# = XXXXXXXX
TONER LEVEL = 0-9
= UNKNOWN
CARTRIDGE COUNT = XXXX
LOW THRESHOLD = XXXX
EMPTY THRESHOLD = XXXX
•
Printer State
“Ready” is the expected return
•
Serial Number = Printer Serial Number
•
Page Count = Printer Page Count
•
Cartridge Type
“MICR” is the expected return. “Normal” could mean the command was sent to a
non-MICR printer
•
Cartridge Status
“OK, Low, and Empty” are the expected returns. “Unknown” is possible if the
cartridge had just been installed.
•
Cartridge Serial = Cartridge Serial Number
•
Toner Level
A single digit return giving a rough estimate of toner remaining
9 = Full, 0 = Empty
•
Cartridge Count = xxxx
Data indicating toner usage by counting pixels printed
•
Low Threshold = xxxx
The Toner Low point based on cartridge count value
•
Empty Threshold = xxxx
A cartridge count value that determines when printing must stop to ensure quality
MICR documents