Samsung BN68-02426A-00 - Manual (Page 18)

English - 18
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
N
The Screen Saver is activated if there is no operating signal for longer than 15 minutes. N
1. Press the POWER button on the remote control.
The message Menu Language, Store Demo, Channels, and Time will be set. is
displayed.
2. Press the ENTERE button, then Select Language of the OSD. menu is automatically
displayed. Press the ENTERE button.
Press the ▲ or ▼ button to select language, then press the ENTERE button.
The message Select ‘Home Use’ when installing this TV in your home. is displayed.
3. Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTERE
button.
We recommend setting the TV to Home Use mode for the best picture in your home
environment.
Store Demo
N
mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home
Use (Standard): Press the Volume button on the TV. When the volume OSD is
displayed, press and hold the MENU button on the TV for 5 seconds.
4. The message Select the Antenna source to memorize. is displayed.
Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTERE button to select Start.
Air • : Air antenna signal.
Cable • : Cable antenna signal.
Auto • : Air and Cable antenna signals.
In N Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button.
If you have Digital cable, select the cable system signal source for both Analog and
Digital. Contact your local cable company to identify the type of cable system that
exists in your particular area.
5. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the
N
ENTERE button with Stop
selected.
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears. N
Press the ENTERE button when channel memorization is complete.
6. The message Set the Clock Mode. is displayed. Press the ENTERE button.
Press the ▲ or ▼ button to select Auto, then Press the ENTERE button. The message Set to daylight saving time. is displayed.
If you select Manual, Set current date and time is displayed. For detailed descriptions about the Manual, refer to page 30.
7. Press the ▲ or ▼ button to select Off, On, or Auto, then press the ENTERE button.
The image to select time zone in which you live is automatically displayed.
8. Press the ▲ or ▼ button to select the time zone, then press the ENTERE button.
If you have received a digital signal, the time will be set automatically. If not, see page 30 to set the clock.
9. The brief instruction on How to get the best performance from your new HDTV. is displayed.
Press the ENTER E button.
T
N
his menu is available HD connection Guide in the Support menu.
10. Press the ENTERE button. The message Enjoy your TV. is displayed. When you have finished, press the ENTERE button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTERE button.
2. Press the ENTERE button again to select Plug & Play. For further details on setting
up options, press the ENTERE button again.
The
N
Plug & Play feature is only available in the TV mode.
Plug & Play
Menu Language, Store Demo, Channels, and Time will be set.
Enter
Start
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto Start
Start
Skip Enter Move
Start
OK
Plug & Play
Enjoy your TV.
Plug & Play
►
Language : English
Time
Game Mode : Off
V-Chip
Caption
Melody
: Medium
Setup
Plug & Play
Auto Program in Progress.
Stop
3%
DTV Air : --
DTV Cable : --
Air : 8
Cable : -- 11 Air
Enter Skip
BN68-02426A_Eng.indb 18 2009-09-10 �� 2:58:24