The Swan Corporation KSEU-3020 - Manual (Page 4)

Patent Pending
Form #400-1-94-10M
KITCHEN SINK Model No. KSEU-3020
APPLY
CAULK
Installation • Care and Cleaning
7. Apply a bead of caulk (not included) to the underside of the
sink flange and position sink into counter top opening. First,
tighten screws in front, then tighten rear screws. 8. Connect all faucet supply lines, disposal (if available), and
drain trap fittings per manufacturer instructions.
CHECK FOR LEAKS:
• Supply user tubes to faucet
• Supply riser tubes to shut off valves or lower connections
• Fill sink with water and check for leaks around drain
• Release water from sink and check for possible leaks
• Tighten as needed
CLEANING
Clean your Swanstone kitchen sink as you would any other fine
bath fixture, using normal household detergents and cleansers.
Just wiping the wall surfaces quickly removes watermarks and
residue. Occasional scrubbing with household abrasive cleansers
ensures that the original luster is maintained, similar to tile and
other permanent type bath fixture materials. REPAIRING
Solid Colors
Use 400 grit sandpaper to remove scratches and gouges in the
surface. A “scotchbright pad” can be used to blend in the area.
Aggregate Colors
Use 400 grit sandpaper to remove scratches and gouges in the
surface. To blend in the area use a fine grade, white, automotive
polishing compound or paste wax.