Smooth Fitness CE 3.2 - Manual (Page 12)

CE 3.2 ELLIPTICAL TRAINER
Visit us at: www.smoothfitness.com
12
ASSEMBLY
STEP 1 :
A. First make sure to connect the Wire Harness – Middle (204) and
Wire Harness – Lower (522) as shown below.
B. Attach the Front Upright Frame (201) to the Frame (501) and
secure using two M10 x 94 mm Bolts (709), two ID 10mm Curve
Washers (731) and two M10 Nuts (729).
NOTE:
Make sure the wire is recessed into the frame, do not trap the wire.
709x 2
729 x 2
731 x 2