Assembly – Smooth Fitness CE 3.2 User Manual
Page 13
Advertising
![background image](/manuals/153962/13/background.png)
CE 3.2 ELLIPTICAL TRAINER
Visit us at: www.smoothfitness.com
13
ASSEMBLY
STEP 2
:
A. First make sure to connect the Wire Harness - Upper (107) with Wire Harness -
Middle (204) and Hand Pulse Sensor Wire – Upper (106) with Hand Pulse
Sensor Wire – Middle (205) as shown below.
B. Attach the Computer (101) to the Front Upright Frame (201) using four M6 x
20mm Bolts (733).
NOTE:
Make sure all wires are recessed into the Console Housing, do not trap or pinch any
of the wires.
733 x 4
733
101
201
Advertising