Spectra Logic T380 - Manual (Page 4)

April 2013 Drive Installation or Replacement—Spectra T200, T380, T680, T950, and T-Finity Library
4
Illustrations The replacement drive that you received may not look
exactly like the drives shown in this document.
Most of the figures in this guide show the Spectra T380 library. The relative
locations of the components and the procedures are the same for the other
libraries unless otherwise indicated. The differences are indicated by
library type; for example:
 Spectra T200, T380, or T680—items indicated with this text refer to any
one of these three libraries.
 Spectra T950 and T-Finity—items indicated with this text refer to
either of these two libraries.
User Interface Updates The BlueScale user interface changes as new
features are added or other modifications are made between software
revisions. Therefore, the user interface screens on your library may differ
from those shown in this document.
Drive Bay Assemblies Each drive is mounted on a drive sled which is
installed in a drive bay assembly (DBA) in the back of the library. If there
are no empty drive bays in your library, you must install a new DBA to
accommodate additional drives.
Tape Drive Support This table shows the tape drives supported by the
individual libraries.
Library LTO-3 LTO-4 LTO-5 LTO-6 TS1140
technology
T200 Y Y Y Y N
T380 Y Y Y Y N
T680 Y Y Y Y N
T950 Y Y Y Y N
T-Finity N Y Y Y Y