Star Trac E-TBT - Manual (Page 13)

STAR TRAC E SERIES TOTAL BODY TRAINERS O WNER ’ S M ANUAL 13
Using a 3/16” Allen wrench and five 1/4”-20 X 1/2” socket head screws, secure
the upper body arm to the hub. Tighten the screws to 240 lb-in(27 N-m) of
torque.
Repeat for the right-side upper body arm.
NOTE: Be sure all five upper body arm mounting screws are tightened securely.
Check the condition of these screws regularly as described under “Preventative
Maintenance.”
4. Leveling the Unit
Place the Total Body Trainer on the floor in the position in which it will be used. Use
the leveling adjusters (located on the underside of the rear feet) to compensate for
uneven floor surfaces and to eliminate wobbling.
Operate the unit to check for proper operation.
Make sure that all screws are tight.
O
PERATING
I
NSTRUCTIONS
Operating the STAR TRAC E SERIES TOTAL BODY TRAINER is very easy. Simply access the Total Body Trainer by stepping on to
the Soft Trac
® pedals, begin striding, and press QUICK START. Learning the features and incorporating the STAR TRAC E SERIES
TOTAL BODY TRAINER into your members' fitness programs is just as easy. In this chapter, you will learn the display functions and
how to get the most out of every STAR TRAC E SERIES TOTAL BODY TRAINER workout.
IMPORTANT: Before operating the Total Body Trainer, you must be familiar with the following equipment limitations:
■ Maximum Weight: Your STAR TRAC E SERIES TOTAL BODY TRAINER is designed for a maximum user weight of 350
lbs/159 kg. DO NOT exceed the maximum user weight.
DISPLAY PANEL FEATURES
Your STAR TRAC E SERIES TOTAL BODY TRAINER is
equipped to provide you and your users unlimited exercise
opportunities. Experiment with its features to find the right com-
bination for your fitness regimen. The Display panel provides the
operating controls and display elements described in the follow-
ing paragraphs, and is consistent for both the Pro and Elite Total
Body Trainers.
QUICK START Key: Enables the Total Body
Trainer for manual operation using a default
weight as set in Maintenance Mode, a default
LEVEL of "1", and a default time limit as set in
Maintenance Mode.
NOTE: Default time and weight are adjustable
through Manager/Maintenance Mode. See
Chapter 7 for details.
i PULSE TM
NUMERIC
KEYPAD
UPPER DATA
INFORMATION
WINDOW
LOWER DATA
INFORMATION
WINDOW
QUICK START
KEYPAD
FAN CONTROL
KEYPAD
PROFILE
DISPLAY
PRESET
PROGRAMS
KEYPAD
SELECT FIT
KEYPAD
LEVEL ADJUST
KEYPAD
MESSAGE
WINDOW
MOTIVATIONAL
TRACK
1/4-20 x 1/2”
SOCKET
HEAD
SCREWS